ULTRABIT requires 2-step verification to protect the user's assets.
Please set up the two-step verification.
What is two-step verification?
In general, to log in to a website, you enter your ID and password.
Two-step verification increases security by performing another step of authentication after entering the password.
After setting up the two-step verification, the login flow is as follows
1: Enter your ID and password.
2: Login is complete after completing the two-step verification
Two-step verification is called "two-step verification".
ULTRABIT can set up two-step verification using the "Google Authentication System".
Setting up two-step verification
Time required: 5 minutes
What you'll need: a smartphone or tablet with an app installed
In order to set up 2-step verification, you need to log in to your ULTRABIT account There is a
If you have not yet created an account, please click on the link below to create an account.
After logging into your account, click on "SETTING" .
Click on "2-FA AUTHENTICATION" to go to the 2-step verification setup page.
In the red frame of the image, there is a link to the app needed to set up the two-step authentication, so you can use the
Please check your device before installation.
For Android：click here to install
For iOS：click here to install
You can also download the "Google Authentication System" app from the link above.
Or, you can download it from the Play Store for Android, or from the Apple Store for iPhone
You can access the installation page by searching for "Google Authentication System".
Once the app is installed, launch the "Google Authentication System" app.
Select Scan QR Code, then select the QR code displayed on ULTRABIT Please load it.
After the loading is completed, the authentication code will be displayed in the "Google Authentication System".
Enter code from your Google Authenticator App to authenticate Please enter the code
Enter your ULTRABIT password in the Confirm your password Please do so.
Click on "Enable 2 -Factor authentication" when you have completed your entry and click Please note that the "Google Authenticator" verification code is updated every 30 seconds.
*Please note that the authentication code for the Google Authenticator is updated every 30 seconds.
If the red frame in the image is set to "ENABLED", you have completed the setup.
The next time you log in, you will be asked to enter the authentication code after entering your password.
How to remove the two-step verification
To cancel the 2-step verification, please do the following while the 2-step verification is ENABLED .
1: "Enter code from your Google Authenticator App Please enter the verification code in the box "Confirm your password".
2: In the "Confirm your password" field, enter the password for ULTRABIT.
After completing the above steps, you will need to add "Disenable 2 -Factor authentication" to Click here.
The next time you log in, you won't need to enter the verification code.